Find Automech Car Scissor Lift, Car Scissor Lift Brisbane, Car Scissor Lift Bendpak on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Scissor Jack > Car Scissor Jack Bunnings

Car Scissor Jack Bunnings

Car Scissor Jack Bunnings

    Min. Order: 1 Set/Sets
    Packaging: export standard wooden case
    Productivity: 1000sets
    Brand: zhongcan
    Transportation: Ocean,Land,Air,Express
    Place of Origin: China
    Supply Ability: 10sets/week
    Certificate: ISO9001
    HS Code: 8425429000
    Port: Shanghai,Qingdao,Tianjin

Basic Info

Model No.: 1.2~1.8M

Product Description

Mid-rise Scissor Car Lift

Troubleshooting

Problem
Cause
Solution
When the lift is rising, the motor stops running
1. The circuit switch has been interrupted
2. The AC contactor circuit has been interrupted
1. Check the circuit switch
2. Check the AC contactor
Motor does not run but makes a humming noise
1. Power phase loss
1. Stop running, check whether the motor is damaged, and check whether the power line is out of phase.
The motor runs but the lift does not go up
1. The motor rotates incorrectly
2. Insufficient hydraulic oil
3. There is air in the pump station, which causes the hydraulic pressure to be unsmooth
4. Sliding valve blocked
5. There is residual material inside the solenoid valve
6. Damaged sealing ring
7. There are other substances left in the front of the oil filter
8. The manual screw of the electromagnetic pressure relief valve is loose 9. The pressure relief valve pair is manually opened 10. The limit switch works or is damaged
1. Change the motor phase
2. Add hydraulic oil
3. Take out the one-way valve and press the up button (pay attention to the interface), until the oil flows out, the one-way valve can be reset. If it is invalid, the auxiliary operation can be repeated.
4. Inspect the seal and seal components and replace.
5. Clean the inside of the solenoid valve
6. Remove the bolts and cabinets connecting the pump station, pull the motor out 30mm and support it with strips. Press the up key and observe the assembly for leaks, replace the retaining ring if there is leakage.
7. Clean the oil filter
8. Tighten the screws
The rate of rise is very slow
1. The sealing ring is damaged
Check seals and seal components and replace
The lift cannot be lowered
1. The electromagnetic pressure relief valve is in a non-electric state
2. The electromagnetic oil drain valve is damaged
3. The internal button switch is not properly connected
4. Insufficient air pressure
1. Check whether the lower button and solenoid oil drain valve circuit are closed
2. Check the solenoid oil drain valve and repair it
3. Check the switch button
4. Adjust the air pressure and open the mechanical lock


scissor car lift





car lift table



Lifting weight
4000kg
Platform length
1550mm
Lifiting height
1200mm~1800mm
Lifting time
25s~30s
Min. height
110mm
Voltage
220v/380v/etc
Platform width
530mm~635mm
Power

2.2KW



1 2m Car Lift







a) The main structure is ultra-thin, the space requirement is small, the ground installation is convenient for maintenance and handling, but it can also be installed in the ground. Scissor Car Lift Table
b) Adopting the structure of double-tandem synchronizing oil cylinders, it can lift small and medium-sized cars. Automech Car Scissor Lift
c) Triple safety protection: hydraulic interlocking of double tandem oil cylinders, hydraulic self-locking, and safety mechanical lock. Hydraulic Car Scissor Lift Table
d) External leveling device, easy to operate, level and adjust quickly. Car Scissor Lift Brisbane
e) The hydraulic system adopts Italian solenoid valve and imported sealing components to ensure long-term use and stability.
f) When the power is cut off, the hydraulic system can use manual operation to lower the machine. Car Scissor Lift Bendpak
This machine is composed of four parts: mechanical part, hydraulic system, pneumatic system and electrical system. Car Scissor Jack bunnings





zhongcan machinery Co.,Ltd

  • 1
  • 2
  • 3
  • 4
  • 5
 Zhongcan Machinery Co., Ltd. is a modern technology-based manufacturing enterprise specializing in the design, research and development, production, sales and after-sales service of Lifting Equipment. There are six series of more than fifty varieties. The main products are home lifts, wheelchair lifts, car lifts, towable trailer boom lifts, self-propelled boom lifts,mobile scissors lifts, self-propelled scissors lifts,fixed scissor lifts, fixed docking ramps, mobile docking ramps, rail hydraulic cargo lift platforms, aluminum alloy mast lifts etc.

Company Info

  • Company Name: zhongcan machinery Co.,Ltd
  • Representative: Zhongyong Feng
  • Product/Service: Home Lift , Scissor Lift , Cargo Lift , Boom Lift , Car Lift , Wheelchair Lift
  • Capital (Million US $): 10000000RMB
  • Year Established: 2005
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 4
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): Below 1,000 square meters
  • Factory Location: taishan steel market,manzhuang town
  • Contact Person: Ms. Amy Xu
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters